• Work area 300mm x 300mm
• 300mm XY motion Control System
• Atomizers
  • 2 Pneumatic (model 2P) or
  • 2 Ultrasonic (model 2U) or
  • 1 Ultrasonic & 1 Pneumatic (model UP)
• Dual Atomizer Deposition Control Systems
• Fine Feature Deposition Head with Heater & Shutter
• Heated Platen
• Stainless Steel Cabinet with Granite Table Top
• Safety Enclosure (CE)
• Optional 700 mW Laser or UV Cure Systems
• Optional Wide Feature Deposition Head

Workhorse platform for general material science R&D and low-volume fabrication of electronic circuitry and components. Also ideal for product development, prototyping and life sciences research. Example applications include:

• 3D Interconnects for multi-chip packages
• Embedded passives
• Printed sensors and antennas on conformal surfaces
• Bio fabrication

• Fine Feature sizes to 10 um
• Wide Features Sizes to 1 cm
• Thin layer deposits from 100 nm
• Many inks and substrates
• Ink viscosity range from 1-1000 cP
• Nano material deposition
• Planar and Non-Planar Capabilities
• Low Temperature Processing

• Work area 300mm x 300mm
• 300mm XY motion Control System
• Two Pneumatic Atomizers with Heaters/Stirrers
• Dual Atomizer Deposition Control Systems
• Fine Feature Print Head with Heater and Shutter
• 10 Nozzle Fine Feature Print Head
• Heated Platen
• Stainless Steel Cabinet with Granite Table Top
• Wafer Alignment Templates for easy alignment of 210 x 210mm, 156 x 156mm and 125 x 125mm wafers
• Safety Enclosure (CE)
• Optional 700 mW Laser

Specially configured Aerosol Jet system designed for photovoltaic research and rapid maufacturing process development applications. Example applications include:

• Fine line collector lines for C-Si solar cells
• Accurately printed dopants and etchants
• Interconnects or bus lines for CIGS thin film solar

• Collector lines < 35um
• Non-contact printing
• No stencils or masks required
• Easy to generate new print patterns
• High integrity circuits - no breaks
• Supports non-planar and thin substrates
• Controlled deposition thickness
• Uses Aerosol Jet Ready PV materials

• Work area 370mm x 470mm
• Dual Atomizer Deposition Control System
• One Ultrasonic Atomizer
• One Pneumatic Atomizer with Heater/Stirrer
• Fine Feature Print Head with Heater and Shutter
• 370mm x 470mm Work Area
• 370mm x 470mm XY Auto Motion Control System
• Heated Platen
• Safety Enclosure (CE)
• Optional Z-axis motorized control
• Optional 700 mW Laser with Class I enclosure

Specially configured Aerosol Jet System designed for touch screen and flat panel display research and rapid manufacturing process development. Example applications include:

• Bridge and jumper circuits
• Edge interconnect circuits for mobile devices
• Fully printed TFTs

• Feature sizes to < 10 um
• Gen 2 substrate support
• Wide variety of conductive materials
• Rigid and flexible substrates