Products

— Overview
> Aerosol Jet Lab Systems <
— Aerosol Jet OEM Systems
— LENS Systems


Aerosol Jet Downloads

Product Downloads

We're Here to Help

Contact our sales technical representative


Aerosol Jet Lab systems are ideally suited to develop next generation processes and devices for photovoltaic, touch screen displays, 3D interconnects and other printed electronics and biologics applications. A number of Aerosol Jet Lab system configurations are available to meet your specific application requirements. Click here for more information on Aerosol Jet Applications or to access data sheets on Aerosol Jet Lab Systems


Aerosol Jet Lab System Configurations
Aerosol Jet 300 Systems
Key Features
  • Work area 300mm x 300mm
  • Ultrasonic Atomizer
  • Pneumatic Atomizer with heater/stirrer
  • Computer-controlled positioning system
  • Heated Platen
  • Safety Hood (CE)
  • Single-nozzle head with shutter
  • Optional Z-axis control
  • Optional Custom Multi-nozzle heads
  • Optional 700 mW Laser
Applications

Workhorse platform for general material science R&D and low-volume fabrication of electronic circuitry and components. Also ideal for product development, prototyping and life sciences research. Available in either Open Platform (P) or Covered Enclosure (CE) configurations. Example applications include:

  • 3D Interconnects for multi-chip packages
  • Embedded passives
  • Printed sensors and antennas on conformal surfaces
  • Bio fabrication
 Print Capabilities
  • Feature sizes to 10 um
  • Thin layer deposits from 50 nm
  • Many inks and substrates
  • Ink viscosity range from 1-1000 cP
  • Nano material deposition
  • Non-planar surfaces

Click here to access data sheets on Aerosol Jet Lab Systems



Aerosol Jet Lab System Configurations
Aerosol Jet Solar Lab System
Key Features
  • Work area 300mm x 300mm
  • Two Pneumatic Atomizers
  • Computer-controlled positioning system
  • Heated Platen
  • Multi-nozzle head with shutter
  • Single nozzle head with shutter
  • Fixture for easy alignment of 210 x 210mm, 156 x 156mm and 125 x 125mm wafers
  • Heater/stirrer for material control
  • Safety Hood
  • CE Certified
Applications

Specially configured Aerosol Jet system designed for photovoltaic research and rapid maufacturing process development applications. Example applications include:

  • Fine line collector lines for C-Si solar cells
  • Accurately printed dopants and etchants
  • Interconnects or bus lines for CIGS thin film solar
 Print Capabilities
  • Collector lines < 35um
  • Non-contact printing
  • No stencils or masks required
  • Easy to generate new print patterns
  • High intensity circuits - no breaks
  • Supports non-planar and thin substrates
  • Controlled deposition thickness
  • Uses Aerosol Jet Ready PV materials

Click here to access data sheets on Aerosol Jet Lab Systems



Aerosol Jet Lab System Configurations
Aerosol Jet Display Lab System
Key Features
  • Work area 370mm x 470mm
  • Ultrasonic Atomizer
  • Pneumatic Atomizer with heater/stirrer
  • Computer-controlled positioning system
  • Heated Platen
  • Single-nozzle head with shutter
  • Enclosure
  • CE Certified
  • Optional Z-axis control
  • Optional Custom Multi-nozzle heads
  • Optional 700 mW Laser with Class I enclosure
Applications

Specially configured Aerosol Jet System designed for touch screen and flat panel display research and rapid manufacturing process development. Example applications include:

  • Bridge and jumper circuits
  • Edge interconnect circuits for mobile devices
  • Fully printed TFTs
 Print Capabilities
  • Feature sizes to < 10 um
  • Gen 2 substrate support
  • Wide variety of conductive materials
  • Rigid and flexible substrates

Click here to access data sheets on Aerosol Jet Lab Systems



Comparison of Aerosol Jet Lab System Features
FEATURES AJ 300P AJ 300CE AJ Solar Lab AJ Display Lab
Work Area 300mm x 300mm 300mm x 300mm 300mm x 300mm 370mm x 470mm
Single Nozzle Print Head/Shutter Yes Yes Yes Yes
Multi-nozzle Print Head N/A N/A Yes (8) Special
Ultrasonic Atomizer Yes Yes N/A Yes
Pneumatic Atomizer with Heater/Stirrer Yes Yes Yes (2) Yes
Heated Platen Yes Yes Yes Yes
X, Y Axis Motion Control System Yes Yes Yes Yes
Z-Height 50mm Motorized Control Optional Optional N/A Optional
Safety Hood N/A Yes Yes Yes
System & Process Control Software Yes Yes Yes Yes
700 mW, 830 nm IR Laser N/A Optional N/A Optional
CE Certified N/A Yes Yes Yes

Click here to access data sheets on Aerosol Jet Lab Systems





Copyright © 2006 Optomec. All Rights Reserved. HOME | PRIVACY | SITEMAP