Aerosol Jet 5X Systems2018-08-09T17:43:11+00:00

Aerosol Jet 5X Systems

Enables fully printed antennas, sensors and MIDs.


The Aerosol Jet 5X system is ideally suited for 3D Printed Electronics applications such as fully printed antennas, sensors, and Molded Interconnect Devices (MIDs). The system comes equipped with an Optomec Sprint print module ideally suited for high resolution printing of electronic circuits and devices for rapid prototyping, product development and printed material evaluation. An optional Optomec print module can be added for process development and low volume production runs. The Aerosol Jet 5x system comes with 5 axes of coordinated print motion.

3D Printed Sensors

Optional Features

  • Swappable Marathon Print Module
  • UV Cure Module
  • 700Mw, 830nm IR Laser

Standard Features

  • Work area 200mm x 300mm x 200mm
  • Motion Repeatability Accuracy +/-2 Microns
  • Two Sprint Atomizers
  • One Sprint Fine Feature Deposition Head with Heater and Shutter
  • Interchangeable Sprint Wide Feature Deposition Head with Shutter
  • System and Process Control Software
  • Tool Path Generation Software
  • Stainless Steel Cabinet with Granite Table Top
  • CE


Advanced development platform specifically geared for printing electronics onto complex 3D surfaces. Ideally suited for process development, rapid prototyping and low volume production. Example applications include:

  • 3D Antenna for Smart Phones and Tablets
  • Complex Molded Interconnect Devices
  • Printed Sensors and Circuits for the Internet of Things
  • Low Volume Manufacturing


  • Fine Feature Sizes to 10 um
  • Wide Feature Print Head supporting millimeter feature sizes
  • Many Inks and Substrates
  • Ink Viscosity Range from 1 to 1000 cP
  • Deposition onto 3D Substrates
  • Low Temperature Processing